Irrigation & Water

Sprinkler blowouts before the hard freeze

Water left in irrigation lines expands when it freezes, cracking pipes, valves and backflow devices. A blowout clears the water out with compressed air so spring start-up is simple instead of a repair bill.

What's included

Everything that comes with the job

  • Shut down & drainClose the irrigation supply and relieve pressure
  • Zone-by-zone airClear each zone with regulated compressed air
  • Backflow careDrain and protect the backflow device
  • Drip zonesClear drip lines at safe, low pressure
  • Controller off-seasonSet the timer to off or rain mode
  • Problem notesWe flag anything that needs repair in spring
How it works

From first call to finished job

📘 Read the guide: When to blow out sprinklers in Santa Fe →

1. Book in early fall

Get on the schedule before the first hard freeze.

2. Shut off & connect

Supply off, compressor connected at the right spot.

3. Blow out each zone

Until heads run dry, without over-pressurizing.

4. Wrap up

Backflow drained, controller set, notes left.

Questions

Sprinkler Blowouts FAQ

When should I blow out my sprinklers?

In fall before overnight hard freezes, typically October in the Santa Fe area. Earlier is safer at higher elevations.

Can I just drain the system instead?

Draining helps, but low spots and valves often hold water. A blowout with compressed air clears what draining leaves behind.

Do drip systems need a blowout?

Yes. Drip lines, filters and valves can crack too. We clear drip at low pressure so tubing and emitters aren't damaged.

Can you start my system back up in spring?

Yes. Spring start-up includes turning water on slowly, checking every zone and fixing anything winter broke.

Ready to get started?

Call or text Bradley, or send a request online.

Related

Often paired with

Service area

Sprinkler Blowouts near you

Available in Santa Fe, Pojoaque, Tesuque, Nambé, Eldorado and Arroyo Hondo.

Call Text